20L Water Based Flame Retardant for Fabrics, Wood & Natural Fibres – Contractor Size Fire Retardant

⭐ Best Value – Contractor Size

Our 20L Water Based Flame Retardant is designed for large treatment areas and professional use. Ideal for projects where reliable fire protection is required on fabrics, natural fibres and untreated wood.

Key benefits:

• Lowest cost per litre – best value option
• Ideal for upholstery workshops and contractors
• Suitable for theatres, hotels, schools and event spaces
• Water-based formula – easy to apply with a sprayer
• Tested flame retardant performance

⭐ Typical Applications

This water-based flame retardant is suitable for treating materials used in residential, commercial and event environments, including:

• Curtains and drapes
• Upholstered furniture
• Decorative fabrics and wall coverings
• Event décor and stage materials
• Natural fibres such as cotton, linen and canvas
• Untreated wood surfaces
• Theatre backdrops and stage curtains
• Exhibition stands and display materials

Ideal for use by contractors, upholstery workshops, interior designers, theatres, schools, hotels and event companies.

Cost per litre: Only R72.50 per litre

⭐ Used Across South Africa

Our water-based flame retardant products are used throughout South Africa in:

• Hotels and guest houses
• Schools and universities
• Theatres and cinemas
• Restaurants and nightclubs
• Event venues and exhibition stands
• Film and television set design
• Upholstery and décor manufacturing
• Informal housing fire-prevention projects

Flame Retardant Solutions supplies fire retardant treatment products across South Africa.

⭐ Coverage Guide

Coverage will vary depending on the material being treated and the absorbency of the surface.

• Fabrics and natural fibres: approximately 10 m² per litre
• Untreated wood surfaces: approximately 2.5 m² per litre

A 20L drum can treat up to approximately 200 m² of fabric materials or around 50 m² of untreated wood, depending on surface absorption and application method.

Always test a small section first to determine the correct application rate.

⭐ Fire Performance Tested

Tested on 12 mm untreated plywood according to SANS 10177 Part 9.
Suitable for treating fabrics, natural fibres and untreated wood surfaces. Always test a small section before full application.